EPIP20-LT 10A Solar Panel Charge Controller
EPIP-20 LT SERIES SOLAR CHARGE CONTROLLER
Characteristics
●Battery Ah setting
●Operating and setting easily
●Automatic selection of voltage 12/24V
Charging Control
●PWM charging
●Temperature compensation. Boost, equalizing, float charging
●Four work mode: ON/OFF, lighting control, Lighting + hours on, ON/OFF+exact time
Protecting Function
●TVS lighting protecting
●Over-load, short circuit, polarity reverse protection, electronic fuse.
Display
●LCD display specially designing for solar system
●LCD display: all system parameters in digital value, system status as symbols
●Accurate clock show
|
Type |
EPIP20-LT |
||
|
Rated charging current |
10A(max12A) |
15A(max18A) |
20A(max23A) |
|
Rated load current(Ie) |
10A |
15A |
20A |
|
Over load, short circuit protection |
1.25 times of Ie for 60secs,1.5 times of Ie by for 5secs overload protection;≥3 time of Ie short circuit protection |
||
|
Self consumption |
Control mode:<15 mA, LED & LCD display <15mA,Total: <30mA |
||
|
System voltage |
12/24V AUTOWORK, |
||
|
Work temperature |
industrial:-20℃ to +70℃ |
||
|
Battery capacity |
Battery in parallel from 50AH to 5000ah |
||
|
Boost charging |
14.8V;×2/24V |
||
|
equalizing charging voltage |
14.4V;×2/24V |
||
|
Float charging |
13.6V;×2/24V |
||
|
Low voltage disconnect |
11.1V;×2/24V |
||
|
Low voltage reconnect |
12.5V;×2/24V; |
||
|
Temperature compensation |
5mv/℃/2v; |
||
|
Over discharge voltage |
11.4V; ×2/24V;×4/48V |
||
|
Control mode |
PWM charging mode & ON/OFF mode for options, control point voltage is the intelligent compensation modify of the battery. |
||
Epip20-LT Solar Panel Charge Controller (EPIP20-LT.pdf, 285 Kb) [Download]



