Cart is empty
The functions of protection:
1. Overloading protection: When insert too many appliances and the total power loads, the INVERTER will stop working within ten seconds. Then the red indicator lamp will get light and the INVERTER will be fixed on the protection state. Until reduce the load, turn the on-off of the power to the “OFF” over ten seconds and turn the on-off to the “ON”, then the INVERTER will renew to work;
2. Short circuit protection: When the interior of the appliance starts short circuit, the INVERTER will stop working within one second and be fixed on the protection state. Till take the appliance away, turn the on-off to the “OFF” over ten seconds and turn it to the “ON”, then the INVERTER will renew to work;
3. Temperature protection: When the load is too much or the temperature is too high, the temperature in the interior of the INVERTER will get higher. When the temperature gets to 90℃, the INVERTER will stop working and be fixed on the protection state. Till you turn the on-off to the “OFF” after reducing the load or improving the ventilation condition and turn the switch “on-off ” to the “ON” after the interior temperature gets lower, then the INVERTER will renew to work.
|
Input voltage
|
DC10---- 14V
|
|
Input power
|
≤180W
|
|
Input current
|
0.15----15A
|
|
Output voltage
|
165-- --270V
|
|
Output frequency
|
50----60HZ
|
|
Efficiency
|
75%
|